ElectraStim Flick Multi-Pack Control Unit

ElectraStim Flick Stimulator Multipack – EM60-M

The ElectraStim Flick Stimulator Multipack – EM60-M contains three accessories: an ElectraStim Flick single-channel stimulator, an Aura silicone probe, conductive pads, as well as all necessary cables and a charger for immediate use.

Our rechargeable ElectraStim Flick EM60 stimulator features one stimulation channel, seven stimulation patterns, 24 intensities and a revolutionary motion-synchronized flick mode that offers a range of exciting stimulation settings.

Specifications:
Rechargeable via USB – no batteries required
Up to 6 hours of usage time between charging cycles
Battery level indicator
Easy to use, even for beginners
More intense pleasure in all sexual activities
Ideal for masturbation, foreplay, or as a sex toy for couples during penetrative sex.
7 stimulation settings, including continuous stimulation, pulsation and increase
24 intensity levels
Soft-touch control unit with push buttons and LED display
Small size
Manufactured to the highest standards

Dimensions:

95 mm x 55 mm x 15 mm (approx. 3.74 in x 2.25 in x 0.75 in)

What is included in the delivery?

1x ElectraStim Flick EM60 stimulator
1x Bipolar Silicone Noir Aura Multiprobe
2x Uni-Polar ElectraLoops electric cock rings
4x Uni-Polar ElectraPads
1x Tube of conductive gel
1x Premium lubricant sample
1x connection cable with 2 mm plugs
1x charging cable
1x storage bag

Using the EM60:

Charging the EM60 “Flick” stimulator
Connect the included charging cable to your Flick stimulator, plug it into a USB port or adapter, and fully charge it. A red light will illuminate during charging and turn off when charging is complete. A full charge takes up to 3 hours.

Setting up the "Flick" stimulator
Once the stimulator is charged, the fun can begin! Simply plug the connecting cable into the top of your stimulator and insert the two 2mm ends into your chosen electrode(s).

You can also share the sensations with a partner by each using a toy connected to the same cable.

How to use the EM60 “Flick”

Change performance levels
Turn on your EM60 by pressing the on/off button. The display will light up, indicating that the device is active. The intensity level will be set to 0, and the stimulation will be continuous.

Increase the power level by pressing the "Intensity Up" button, and you should feel stimulation. Each press increases the stimulation intensity by one level. You may need to increase it several times before you feel the first sensations. If you do not feel any stimulation, turn off the stimulator and reconnect the probes. Make sure they are fully inserted into your chosen electrode(s). Try again.
There are 24 intensity levels to suit every taste. With a little experimentation, you'll find the right setting for you. If the stimulation is too intense, press the "Decrease Intensity" button or the on/off button to turn the device off. When you turn it back on, the intensity will be reset to 0.

The intensity indicator has 12 lights with three different brightness levels to show the selected intensity level.

Change pattern
Each press of the mode button changes the stimulation pattern.
There are a total of seven settings, and the stimulator always starts with the continuous setting. Each press of the mode button activates a new pattern setting:

Continuous – Gentle and constant
Wave – Slow and gentle waves / massage effect
Escalating wave – alternating fast and slow waves
Slow pulse – Pulsating
Double pulse – Medium pulse followed by fast pulses
Falling pause – Pulsating pattern with increasingly shorter rest phases until the stimulation is constant (repetitions)
Escalating pulse – A slow pulse that rises to a fast pulse and then slows down again.
The LED indicator for output activity flashes orange in time with the stimulation, so you know which pattern setting is selected.

Activate Flick Mode
Press and hold the mode button for two seconds to activate our revolutionary Flick Mode. This special setting allows for stimulation that responds to your movements and creates customized patterns.

How to use Flick mode
Hold the stimulator flat and shake it up and down, similar to a maraca. The harder and faster you shake, the more intense and faster the stimulation will feel. You can adjust the intensity as with all other stimulation modes, so it never feels too strong.
The Flick LED indicator shows you the intensity of each movement. When you reach the maximum selected intensity, four green lights and one red light at the top will illuminate. To increase the intensity further, simply press the "Intensity" button.

Sharing feelings with a partner
You and your partner can share sensations with ElectraStim Flick when using it with an electrode connected to the same stimulator. Connect your electrodes as usual, but instead of one person using both electrodes, each of you uses your own. You can use any combination of electrodes to suit your individual preferences.
Once your electrodes are attached, get into position and ensure your bodies are touching below the waist before turning on the stimulator. Slowly increase the intensity to a level that is comfortable for both of you, as you will both experience the same intensity. During play, you will both feel sensations through your chosen electrodes, but you will also feel that erotic tingling wherever you touch – for a truly synchronized sexual experience.