Lay-on Vibrator Allure Magenta

Lay-on Vibrator Allure Magenta 💫

The Allure from Fun Factory is a lay-on with a suction opening: it is placed over the clitoris and works there with pressure waves in a small chamber, so that hardly anything touches the skin. Its body is rounded and asymmetrical, almost like a pebble, and narrows towards the upper end where the opening sits. It is round, points forwards at an angle and has softly rounded edges. The back carries a glossy strip with two silver buttons and a red Fun button in the middle. Seen from the side, the body has a slight waist, and the strip shines in the same shade as the matt silicone. It is not inserted; it stays on the outside. The silicone is non-porous and absorbs nothing. It sits under lay-on vibrators, under sextoys for women and in the brand world of Fun Factory.

✨ At a glance

• 🏷️ Manufacturer: Fun Factory
• 🧵 Material: Silicone
• 🎨 Colour: Magenta
• 🛠️ Design: Suction opening for pressure waves
• 👉 Use: From the outside, not for insertion
• 🔘 Controls: Two buttons and a Fun button on a glossy strip
• 🔌 Charging: Magnetic, no open socket
• 💦 Waterproof: Yes
• 🧼 Care: Wash, let dry in the open
• 📍 Made in: Bremen

❓ FAQ

How do I position the opening correctly?

Centrally over the clitoris and with light pressure until you feel the suction. If it does not seal, nothing happens; that is the only hurdle with this design. A drop of water-based lubricant on the rim helps, especially on the first try.

What is the difference between pressure waves and vibration?

Vibration acts directly through contact and is felt by many as dull after a few minutes. Pressure waves work more indirectly. The vibrator guide gives an overview of the designs.

How is it charged?

With the magnetic charging cable from Fun Factory; it clings to the contacts by itself. Because no open socket is needed, it is waterproof. Charge it fully once before first use.

How do I care for it?

After use, clean the opening and body with warm water and mild soap, including the strip with the buttons, and let it dry in the open. Store it so that it does not touch other silicone toys, otherwise the surfaces can stick together.

Where is it made?

In Bremen, where Fun Factory has produced since 1996.