Nipple Clamps Vice Style with Chain Silver 30 cm

Nipple Clamps Vice Style with Chain Silver 30 cm 🔩

With the Nipple Clamps Vice Style with Chain Silver by Kink, two small screw clamps of bare metal are joined by a silver link chain. Each clamp consists of a square frame, a pressure bar and a threaded screw with a knurled knob; the chain is hooked into one corner of the frame. They stand under nipple clamps, with BDSM sex toys and under fetish sex toys; what else comes from this brand is shown by the brand world of Kink.

✨ At a glance

• 🧵 Material: metal
• 📏 Measurements: chain 30 cm
• 🛠️ Design: screw clamp with spindle
• ✅ Adjustment: stepless via the spindle
• ⭐ Feature: no spring travel, no give
• ⚠️ Caution: wear for 15 to 20 minutes at a time at most
• 🎨 Colour: silver

❓ FAQ

Where does the pressure come from?

From the screw alone. There is no spring that gives way: as far as you turn, so tight the clamp sits, and there it stays. That makes the setting precise but does not forgive overtightening.

What is the chain for?

It connects both sides. A pull on one clamp reaches the other via the chain, and even its own weight draws both slightly downwards.

How do you put the clamps on?

Wide open. First turn the screw open far enough for the nipple to fit comfortably between frame and bar, place the clamp and then tighten slowly. Hold the chain with your free hand meanwhile so that it does not pull while you are putting them on.

What does the bare metal mean?

No padding between clamp and skin. The edges of frame and bar grip directly, so you feel every small turn.

What applies to wearing time and removal?

Wear briefly, release gently. 15 to 20 minutes at a time at most, and at first only tight enough for the clamps to just hold. If the nipples go numb, cold, white or bluish, take them off at once. Further weights on the chain only with care. On removal the blood rushes back, which is the most intense moment: turn the screw open slowly, take the clamps off one at a time and never yank on the chain.

How do you clean clamps and chain?

With warm soapy water. Rinse everything, dry it well and leave the chain spread out. After drying, turn the screws all the way through once so that no moisture stays in the thread.