Anal Douche Angled Black 8.5 cm

Anal Douche Angled Black 8.5 cm 🚿

The Perfect Angle Douche by Prowler Red is a squeeze-bulb anal douche. At the bottom sits a rounded, teardrop-shaped bulb made of matt plastic, at the top a glossy nozzle that tapers and leans to the side in a gentle curve. Just below the rounded tip there are two small openings on the side, and another sits at the tip itself. The bulb is much wider than the nozzle and stays outside while rinsing. The douche needs neither hose nor connection: you fill it at the washbasin and can take it with you when travelling. It stands under anal douches, with anal sex toys and under anal and fisting lubricant; what else comes from this brand is shown by the brand world of Prowler Red.

✨ At a glance

• ✅ Type: bulb douche
• 🧵 Material: PVC
• 🎨 Colour: black
• 📏 Nozzle: 8.5 cm, curved
• 💧 Openings: two on the side, one at the tip
• 🎛️ Operation: squeeze the bulb
• ⚠️ Caution: lukewarm, low pressure, not deep, not daily

❓ FAQ

How do you fill the bulb?

Squeeze the bulb, hold the tip in lukewarm water and release slowly; it then fills itself. Test the temperature on your wrist first; the water should feel neither hot nor cold.

How do you use it?

Slowly and with little pressure. Put a little water-based lubricant on the tip and insert the nozzle only a short way and without force. Squeeze the bulb evenly and pull the nozzle out while it is still squeezed, so that nothing is sucked back in. One or two fills are enough; if anything hurts, stop.

How often may you rinse like this?

Not daily. The douche is for preparing before anal sex and is not a daily routine; only use it when you really need it.

What is the curve for?

It angles the tip while you hold the bulb in your hand. That way you need to bend your wrist less when inserting it.

Which lubricant suits it?

A water-based one. It is compatible with the plastic and washes off the nozzle and skin easily after rinsing.

How do you clean the douche?

Inside and out, thoroughly after every use. Draw warm water with a little mild soap into the bulb, squeeze it out several times and then rinse with clear water. Let it dry open with the nozzle pointing down so that no moisture stays inside, and store it dry.