Anal Douche CleanStream Automatic with Vibration Black 10.2 cm

Anal Douche CleanStream Automatic with Vibration Black 10.2 cm 📳

The Anal Douche CleanStream Automatic by XR Brands does not rinse by hand pressure but with a motor. At the bottom sits a clear water container that unscrews, above it a shiny silver ring and the black upper part, which runs into a slim silicone nozzle. Inside the container hangs a thin intake tube with a small weight at its end. There are two buttons on the nozzle: the spray comes in three levels, plus a vibration at the nozzle that can be switched on. The water comes out at the tip and through several small openings at the side. A one-way valve makes sure no water flows back into the container. Because nothing has to be squeezed, you keep one hand free. It stands under anal douches, with anal sex toys and under sex toy cleaner; what else comes from this brand is shown by the brand world of XR Brands.

✨ At a glance

• 🧵 Material: plastic with silicone nozzle
• 🎨 Colour: black
• 📏 Nozzle: 10.2 cm long
• 📳 Drive: motor, spray in three levels
• 📳 Vibration: at the nozzle, switchable
• ✅ Container: clear, unscrews
• ⭐ Valve: one-way valve against back flow
• 🪜 Line: CleanStream

❓ FAQ

How do I use the anal douche properly?

Only with lukewarm, clear water and no additives. Soap, shower gel or cleaners never go in. Coat the nozzle with water-based lubricant and insert it gently and without force, only as far as it glides by itself. Start with the lowest spray level, do not take in too much water at once and let it drain again before you refill. Do not rinse too often; before a date a short round is enough. Stop at once if you feel pain or see blood.

How is the container filled?

Unscrew, fill, screw back on. Check the temperature on your wrist first; it should feel pleasantly lukewarm. When screwing it shut, make sure the intake tube hangs freely in the water and is not trapped.

How is it cleaned?

Straight after every use. First let clear water run through the nozzle, then unscrew the container and rinse it with warm water. Wipe the outside of the nozzle with mild soap and rinse it well. There is no information on the water resistance of the upper part, so do not submerge it. Let all parts dry open before you put them back together.

How do I store it?

Dry, open and free of dust. Only put the container back on once no drops are left inside, so nothing settles. A pouch of its own or a shelf in the bathroom cabinet keeps the nozzle clean.