Anal Douche with a Bulb Small Black 6 cm

Anal Douche with a Bulb Small Black 6 cm 🚿

The Classic Douche by Prowler Red in the small version is a handy anal douche: a compact, teardrop-shaped bulb in matt black plastic with a short, slim nozzle that tapers towards the tip. The nozzle is straight and smooth, without edges or grooves. Bulb and nozzle are made of PVC and ABS. With its short nozzle and small fill, it suits you well if you have little experience with anal douches so far. It needs no connection; you fill it at the basin, and it disappears into any wash bag. It stands under anal douches, with anal sex toys and under anal and fisting lubricant; what else comes from this brand is shown by the brand world of Prowler Red.

✨ At a glance

• ✅ Type: anal douche with a bulb
• 🧵 Material: PVC and ABS
• 🎨 Colour: black
• 📏 Nozzle: 6 cm, straight and smooth
• ✅ Bulb: small, teardrop-shaped
• 🎛️ Use: squeeze the bulb
• ⚠️ Caution: lukewarm, low pressure, not deep, not daily

❓ FAQ

How do you prepare the douche?

With lukewarm water. Squeeze the bulb, dip the tip in and let go slowly until it is full. Test the water on your wrist first: it should feel neither warm nor cool. Water that is too hot or too cold is unpleasant and has no place here.

How do you go about rinsing?

Slowly, with little pressure and not deep. Put a little water-based lubricant on the tip, insert the nozzle without force and squeeze the bulb evenly and without haste. Pull it out while the bulb is still squeezed so that nothing is drawn back in, and let everything run out again on the toilet. One or two fills are enough; if anything hurts, stop.

How often may you rinse like this?

Not daily. The douche is meant for preparing before anal sex, not as a daily routine; use it only when you really need it.

Which lubricant fits?

A water-based one. It gets on with the plastic and washes off nozzle and skin easily after rinsing.

How do you clean the douche?

Inside and out. Draw warm water with a little soap into the bulb, squeeze it out again several times and then rinse with clear water. Let the bulb dry in the open with the nozzle pointing down, so that no moisture stays inside.