Anal Douche CleanStream Set with One-Way Valve and Three Nozzles Blue 225 ml

Anal Douche CleanStream Set with One-Way Valve and Three Nozzles Blue 225 ml 🔵

The Set with One-Way Valve from the CleanStream range by XR Brands consists of a blue bulb with a black threaded neck and three black nozzles that screw on. The bulb has a one-way valve that lets water through in one direction only, so nothing is sucked back when you let go. The nozzles differ clearly: one is thick and wavy, one slim and conical, the third thin with small holes at the side of its round tip. Each has a flat plate in front of the thread. Only the nozzle changes, the bulb of the set stays the same. It stands under anal douches, with anal sex toys and under sex toy cleaner; what else comes from this brand is shown by the brand world of XR Brands.

✨ At a glance

• 🧵 Material: plastic and PVC
• 🎨 Colour: blue, nozzles black
• 💧 Volume: 225 ml
• ✅ Valve: one-way valve against backflow
• 🔩 Contents: bulb and three screw-on nozzles
• 🪜 Range: CleanStream
• ⚠️ Caution: lukewarm water only

❓ FAQ

Which nozzle do you start with?

One of the two slim ones. The thick, wavy nozzle is noticeably fuller and more something for later. Screw the chosen nozzle on hand-tight only and check before filling that it sits straight and firm.

What are the holes in the thin tip for?

They spread the water. Instead of a single jet straight ahead, it comes out there at several points at the side.

What matters when rinsing?

Lukewarm, slow and in small amounts. Check the temperature on your wrist beforehand and use clear water only, without soap or any other additives. Coat the nozzle with lubricant, insert it gently and never push with force. Do not give too much water at once, let it out again, do not rinse more often than necessary and stop at once if it hurts.

Which lubricant suits it?

A water-based one. It agrees with the bulb and nozzles and rinses off with water. With the wavy nozzle in particular it pays to spread the lubricant into the hollows as well.

How is the set cleaned?

Bulb and nozzles separately. Unscrew the nozzle, rinse both parts with warm water and mild soap and squeeze the bulb several times as you do. Rinse the holes of the thin tip separately. Let everything dry in the open, the bulb with the opening facing down.