Intimate Douche in Steel with a Metal Hose 1.5 m

Intimate Douche in Steel with a Metal Hose 1.5 m 🚿

The intimate douche by Metal Hard is made of steel and comes with its own metal hose. The nozzle is a straight, smooth rod with a rounded tip, from whose small holes the water flows out. At its other end it is joined to the hose by a hexagon nut. The hose is made of wound metal and ends in a union nut like the one you know from shower hoses. It stands with anal sex toys, under sex toy cleaner and with sex toys for men; what else comes from this brand is shown by the brand world of Metal Hard.

✨ At a glance

• 🧵 Material: steel
• 🎨 Colour: Silver
• ✅ Hose: metal, 1.5 m
• 🛠️ Nozzle: straight rod with a rounded tip
• 💧 Water outlet: holes at the tip
• 🔩 Connection: union nut at the end of the hose
• ⚠️ Caution: lukewarm water and low pressure only

❓ FAQ

How do you connect it?

Unscrew your shower hose from the mixer tap and fit the union nut of the metal hose in its place. Check beforehand whether the thread of your shower matches the nut, and only tighten it by hand.

How do you use it?

Set lukewarm water and check the temperature on your hand. Turn on only a little pressure, insert the lubricated rod slowly and not deeply, and let in only a small amount of water. Then you pull it out and let the water out again on the toilet; if needed, you repeat this once or twice.

Which lubricant do you use?

The easiest is one from water-based lubricant, which rinses off easily with water. Steel is non-porous and generally tolerates any lubricant.

What goes into the douche?

Clear water only. Soap, shower gel or other additives stay out, because the mucous membrane in the bottom is far more sensitive than the skin outside.

How do you clean it?

Before and after every use you rinse the outside of the rod with warm water and soap or a product from sex toy cleaner, then let clear water run through the hose and holes. Afterwards let rod and hose drain and dry completely.

How do you store it?

Loosely coiled or hanging in a dry place. Do not kink the metal hose, otherwise its windings can bend for good.